180K Plate Ultrasonic Atomizing Piezoelectric Transducer
Description
This is a conventional high efficiency and low energy consumption
microporous atomizer, which has the advantages of large atomization
amount, small atomization particles and long life.
Supply a variety of humidifier atomizers, the product diameter from
3mm-150mm, the smallest aperture to 0.004mm, the number of holes
from 1 to tens of thousands, the thickness of the diaphragm from
0.02mm-0.3mm. At present, there are 8mm, 10mm, 12mm, 14mm, 16mm,
18mm, 20mm, 25mm, and the atomization amount is from 25ml to
660ml/h. Welcome to order.
Our atomizer drive voltage is low: DC3~DC24V, high conversion
efficiency, large atomization amount, optional ring shape and
square shape, stable quality, small exit aperture, ranging from
4um~11um, can be directly attached to the water surface. Mainly
used in medical atomization, humidification, aromatherapy,
high-altitude toys with large atomization, USB power supply desktop
mini humidifier, essential oil and perfume atomization, mosquito
perfume and so on.
We are committed to the research and development of laser
micro-hole technology. It has rich experience in micro-hole
production and has leading production and processing capabilities.
At present, the smallest aperture can reach ∮0.004mm, the hole
shape is not limited, and the aperture is not limited. More than
1:10, you can punch square holes, triangular holes, horn holes,
cross holes and other shapes as needed. Punch on most non-metallic,
metallic materials. Our microporous technology has been widely used
in nozzles, spinnerets, coffee pot filters, atomizers,
humidification and atomization, ultra-fine atomization, medical
atomization, aromatherapy, perfume atomization, perfume nozzles,
parking sensors, precision Electronic detection, electronic
filtering, sonar detection, etc.
A very fine focused laser beam is scanned over the metal material
in an instant, so that a certain number of micropores set by the
computer program are left on the metal sheet, and a customized
piezoelectric ceramic piece can be attached to the back surface of
the piezoelectric ceramic piece. The excitation of the electric
signal generates a high-frequency resonance, and the energy of the
oscillation causes ultrasonic vibration of the microporous steel
film attached to the piezoelectric ceramic sheet, and the liquid
junction adsorbed on the microporous membrane generates ultrasonic
oscillation, and the structure of the liquid is struck. Scattered
to produce a natural and elegant mist. No heating or adding any
chemical reagents, energy savings of 90% compared to heated
atomization.
Features
- Not easy to block
- high safety
- low noise,
- very fine mist,
- long life
- low power consumption
Application
It is used for incense, disinfection, humidification, medical
atomization in industrial environment, home environment and
interior environment, as well as electronic filtering, sonar and
electronic detection in military and electronic fields.
Mainly used in the industry
Perfume, humidification, medical, military, food, electrical and
electronic, vehicles, painting, agriculture, forestry and
fisheries, chemicals, fiber, pulp, printing, kiln, air
conditioning.
TechnicalTerms
| ResonantFrequency(KHz) | 165±5 |
| RatedVoltage(Vdc) | 3-12 |
| Acpeakvoltage(vpp) | 70~90 |
| Capacitanceat120Hz9(pf) | 1500±20% |
| InputPower(w) | 0.8~2.5 |
| HarmonicImpedance | Max.200Ω |
| OperatingTemperature | 5~60° |
| CUsingWaterQuality | DrinkWater |
| Welding Point CanPullForce | Min.0.4KG |
| Connection | 157128#200*1.0+2.0 |
| TerminalHoleArea | 3mm±0.1mm |
| Aperture | 8.5±0.5um |
| holecount | 300±5PCS |
| Sheet steel material | SUS304 |
| rubberring | Silicone |
| Service Life | Min.3000h |
